To compress natural or process gases is a complex task: no matter whether the gas compressor is situated on- or offshore, whether it is used for carbon capture, hydrogen compression or in a biogas plant, for refineries, the chemical or petrochemical industry. Depending on the composition of the gas stream in the process, most conventional compressor oils can react with components of the gas, leading to excessive viscosity dilution, the formation of sludge and deposits, or high carryover rates. Premature wear, extra downtime for maintenance, high oil consumption and shorter oil change intervals are common consequences. At Klüber Lubrication we tune our lubricants to our customers’ needs and the types of gases being compressed.
When mixing under high pressure and temperature, gases may not only be dissolved in the oil, but they are also prone to react with base oils or additives. The complex chemical system present in an oil flooded compressor hosts a vast potential for chemical reaction and polymerisation. The resulting sludge and other residues affect the lubricity of the gas compressor oil, lead to considerable wear on components such as rotors and bearings, or clog oil filters and separators. As a result, the oil consumption of the gas compressor rises, machines need to be stopped for unscheduled maintenance, and oil replaced frequently – all leading to substantial costs.
To break this cycle, reduce costs and establish a more sustainable utilisation of resources, Klüber regards lubricants as an essential design element of the compressor, just like bearings, rotors, or cylinders and pistons. More than 90 years of practical experience in research, development, and the application of specialty lubricants ensure a product quality that increases the reliability, availability, and production capacity of compressors. At Klüber Lubrication we take the whole picture into account to devise the perfect solution.
customer provides the detailed gas stream chromatography
suction and discharge temperature and pressure
consider all process details and current issues
accommodate manufacturer’s instructions and possible limits for oil content in the gas stream
For Klüber the partnership with customers doesn't end there, as we not only provide these lubrication solutions but also offer complementary services that maximise the impact of our lubricants. Tap into our decades of experience to optimise maintenance management with our Total Productive Management services. We offer performance analyses, condition monitoring, and maintenance planning service.
For the gas compressor
- less wear
- longer component life
- longer machine life
- minimum oil consumption
- maximum oil change intervals
For customers
- less downtime due to maintenance
- higher reliability in operation & process
- higher compressor availability
- lower spare parts cost
- optimum economic efficiency
Our Klüber Summit product range offers a full line of petroleum and synthetic lubricants to meet customers’ gas compressor lubrication needs. Our staff of professionals can assist in choosing the right lubricant.
NGP® Series Highly refined petroleum-based lubricant for light to medium-heavy hydrocarbon gases in oil lubricated compressor applications.
NGSH Series Fully synthetic, PAO-based lubricant for light to medium-heavy hydrocarbon gases. High evaporation stability minimises oil carryover into the gas stream in comparison to standard petroleum oils.
LCG Series Fully synthetic, PAO-based lubricant that is free of sulphur and siloxane and was especially formulated for use with reactive and corrosive gases (CO2 and H2S) encountered in biogas plants.
PGS® Series Fully synthetic, PAG-based lubricant for flooded rotary screws working with medium to heavy hydrocarbon gases. It also has a high resistance to thinning by hydrocarbon dilution.
PGI Series Fully synthetic, water-insoluble PAG-based lubricant for hydrocarbon refrigerants (propane, propylene, etc.). Features reduced oil carryover compared to petroleum oils or PAO lubricants.
PGS®-2 Fully synthetic, PAG-based lubricant for flooded rotary screws working with heavy hydrocarbon gases. PGS®-2 has a high resistance to thinning by hydrocarbon dilution.
We look forward to receive your message!
For further information about the processing of your data using the contact form, please refer to our privacy policy.