Article-No: 029118 Advanced synthetic gear and multipurpose oil for food-processing and pharmaceutical industries
Klübersynth NH1 4 N is an advanced synthetic gear and multipurpose oil based on mPAO satisfying the growing requirements and increasing power density of modern gears. Klübersynth NH1 4 N is based on special high-grade raw materials and advanced additives, enabling maximum performance in the lubrication of all gear components.
Klübersynth NH14 N is registered as NSF H1 for use in the food processing and pharmaceutical industries and complies with FDA 21 CFR Sec 178.3570. It was developed for incidental contact with products and packaging materials in the food-processing, cosmetics, pharmaceutical or animal feed industries. The use of Klübersynth NH1 4 N can contribute to increase reliability of your production processes. Nevertheless it is recommended to conduct an additional risk analysis, e.g. HACCP. Klübersynth NH1 4 N is under certification process according to ISO 21469, thus supporting compliance with hygienic requirements of your production. You will find further information about ISO Standard 21469 on our website www.klueber.com.
Klübersynth NH1 4 N clearly exceeds CLP requirements according to DIN 51517-3. Corresponding gears can be switched to Klübersynth NH1 4 N without prior consultation with the gear manufacturer, provided the general application notes are observed.
Klübersynth NH1 4 N offers high scuffing load capacity. Gears are sufficiently protected against scuffing even at extremely high peak loads, vibration or oscillations. The good wear protection of both gears and rolling bearings enables that the service life calculated for the lubricated components is achieved, leading to lower maintenance and repair costs.
Klübersynth NH1 4 N offers a much longer service life than mineral oils due to the excellent ageing and oxidation resistance of the selected raw materials; thus, service intervals can be extended and maintenance costs reduced. The product's low foaming tendency and anti-corrosive properties enable problem-free gear operation.
Freudenberg seals made of 72 NBR 902, 75 FKM 585, and 75 FKM 170055 are statically and dynamically resistant to Klübersynth NH1 4 N, preventing leakage and oil contamination.
The excellent viscosity-temperature behavior supports the formation of a sufficient lubricant film across a wide service temperature range, even at elevated and high temperatures. Therefore, a single viscosity grade can cover both very low and high temperatures in many applications. The optimized friction behavior enabled by the carefully selected base oils and additives reduces power losses and improves application efficiency. This leads to lower oil temperatures and reduced energy consumption.
By using Klübersynth NH1 4 N you can benefit from several advantages that will help you save costs easily and efficiently.
Registered as NSF H1. Certification according to ISO 21469 ongoing
High scuffing protection
Good wear protection for gears and rolling bearings
Excellent ageing and oxidation resistance
Excellent viscosity-temperature behavior for expanded service temperature range
Good shear stability for reliable lubricant film formation
Energy savings due to optimized friction behavior
Increased reliability due to low foaming tendency and good elastomer compatibility
We look forward to receive your message!
For further information about the processing of your data using the contact form, please refer to our privacy policy.